Configure the network
- Open a browser and navigate to the IP address of your Fusion.
NOTE: This can be found on your Fusion Controller tablet in the Room Controller App under Advanced Settings > Network Settings. - Select the Network section and enter the appropriate settings.
- Click Save
| Enable Wi-Fi | Toggle to allow or restrict the Fusion Room System access to a Wi-Fi network. |
| Connection Type | Select if the Fusion Room System will connect via a wired or wireless connection. AP Mode requires the Fusion to use a wired connection |
| Wi-Fi Mode | Select if the Fusion Room System will run in Client Mode or AP Mode. Client Mode supports the Fusion using either a wired or wireless connection. AP Mode requires the Fusion use a wired connection. |
| Network Name | Enter the network SSID. |
| Security | Enter the type of Wi-Fi security. |
| Password | Enter the password to access the Wi-Fi. |
| Enable DHCP Server | DHCP dynamically allocates and assigns IP addresses.
If you disable DHCP, enter the locally configured IP address, subnet mask (used to partition the IP addresses into a network and host identifier), and default gateway. |
| Set the IP Address | Enter the IP address of the system. |
| Set the Default Gateway | Enter the Default Gateway details. |
| Set the Net Mask | Enter the net mask information. |
| Set the Static DNS Server 1 & 2 | Enter the IP addresses to configure DNS servers. Enter the domain names to search when resolving hostnames. DNS translates names of network nodes into addresses; specify this preference to use DNS to resolve the hostnames to IP addresses. |
| Enable Proxy Server (BETA) | **** |