Cisco TelePresence SX20 and Codec C series
- Enter the IP address of the device in your browser. Enter your username and password.
- Navigate to Setup > Configuration > SIP.
- Configure the following and click Save after each option:
- Select On for ANAT.
- Select Auto for DefaultTransport.
- Enter the DisplayName.
- Select Private for the Line.
- Select Off for the ListenPort.
- Select TLSv1.2 for the MinimumTLSVersion
- Select IPv4 as the PreferredIPSignaling.
- Enter the Proxy Address.
- Select Off for TlsVerify.
- Select Standard for the Type.
- Enter the <extension>@lifesizecloud.com for the URI.
- Enter the Password.
- Enter the UserName. This is the extension of the device.